Micro hardness tester – Lithuanian Energy Institute

Equipment model

Shimadzu Dynamic Ultra-Hardness Tester DUH-211S

Made in

Japan

Use for

Effective instrument for performing surface hardness measurements on metals, plastics, rubbers, ceramics, and many other materials.
The instrument measures dynamic indentation depth and permit measurement of very thin films and surface (treatment) layers.

Technical parameters

Test Force Range: Full scale of 0.1 to 1.961 mN;
Test Force Accuracy: ± 19.6 μN or ± 1 % of displayed test force, whichever is greater;
Measurement Range: 0 to 10 μm;
Minimum Measurement Increment 0.0001 μm;
Total Magnification (microscope) – x500;
Area of Specimen Stage – Approx. 125 (W) x 125 (L) mm;
Vertical Distance – Approx. 60 mm;
Stage Movement Range – 25 mm in both X and Y directions;
Test Modes: Load-Hold Test, Load-Unload Test, Cyclic Test, Depth Setting Test, Depth Setting Load-Unload Test, Step Load Test, Step Load-Unload Test.

Division

Center for Hydrogen Energy Technologies (18)

Inquire about the product